Product Details
- Amazon Sales Rank: #115465 in Lawn & Patio
- Brand: Ensupra
- Model: ReadyMadeSolar-260W
Features
- Simply Put the Solar Panel in the Sun & Plug the Electric Cord to Your Wall. Est.Generation 440kWh /yr
- 2 Solar Panels of 130 Watt each (260Watt), UL certified. 5 Years of Warranty.
- Get 30% Federal Tax Credit for Solar. 500 Watt Ensupra Grid Tie Inverter with 1 Year of Warranty
- Do It Yourself in an Hour. No wiring needed. No Batteries. Everything ReadyMade Preconfigured.
- Search ENSUPRA for our Plug'n play Energy Products of Your Choice
Readymade Solar Power Kit- 260Watt Solar Panels (2x130w, UL,USA made) with 500Watt Grid Tie Inverter, Prewired and Configured. Do It Yourself (DIY) Solar; UL ; 25-years Panel Warranty
Product Description
When the sun shines, the 260 Watt Solar panel will produces DC voltage, and the grid tie inverter will change the DC voltage to AC voltage and puts out power to the home grid, generating electricity and cutting your electric bill. TWO STEP INSTALLATION: 1. Put the Solar Panel facing the Sun2. Plug the cord into your 110V wall socketPlease follow local regulatory electrical codes for installation. If in doubt, consult appropriate licensed contractor.Electrical Specifications of Grid Tie Inverter: Maximum AC Output Power: 500W AC Output Voltage Range: 90V ~ 130V AC Output Frequency Range: 46Hz ~ 65Hz Total Harmonic Distortion(THD): <5% Power Factor: 0.96+ DC Input Voltage Range: 12.8V ~ 28V Peak Inverter Efficiency : 94% Standby Power consumption: <0.5W Output Current Waveform: Pure Sine-wave Over Current Protection: Yes Over Temperature Protection: Yes Reverse Polarity Protection: Yes Island Protection: Yes Stackable : Yes WARRANTY: 1 YEAR
Customer Reviews
Most helpful customer reviews
11 of 14 people found the following review helpful.
By Cymek
I just got this yesterday, overall quality of the item is good, but whoever put this kit together didn't do good job.1. It came with about 25 feet of solid copper wire, I think 14 gauge,(don't quote me on it though), NOT stranded.2. The wire nuts were used to connect panels to wiring.3. The inverter power input is up to 24V, that should have been in the description.4. The panels are 21volt each, also should have been in description.5. Does not come with any mounting hardware.I had to go out and but stranded wire to install this properly. Since the inverter take up to 24V I cannot use it in serial, to increase voltage (about 40V) so I could use higher gauge wire. I have to use 6awg and that is not cheap.Overall it does what it should, I wish it had more in the description so I can make a better decision before buying.
3 of 3 people found the following review helpful.
By Mark W. Werwath
This system was up and running in 20 minutes. Note that to properly secure this system and dress the cables and do a proper job takes several hours and a little bit of skill and extra hardware that you will need to procure.This system seems to work fine with a GFI (Ground fault) circuit.This is the system to get if you want to tie into the grid. This is not a system for solar power backup. Ensupra has a different system for that.This may look like an expensive system but after the government rebate, this is very affordable.
3 of 3 people found the following review helpful.
By dave
just put it up,it started to produce power right away.i hooked up a moniter up to it to see how it was doing,it is heavy overcast today,so i only got about 70 - 80 watts out of it,but that seems good for a dark day...i would recomend this for grid tie.
This Page is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED "AS IS" AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
